Stearic Acid Series

  • 0
  • 0

Difference analysis between early strength agent and superplasticizer for concrete

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Since the beginning of this year, people around the world have felt the pressure of rising prices. Not only the rise in oil prices but also different industries have seen soaring prices. According to the latest data, from August 2021 to the present, the inflation rate in the United States has risen for 6 consecutive months, and this data has soared from the previous 5.3% to 7.9% today. Inflation in the United States, the global Many countries have been affected.
According to experts' forecasts, the inflation rate in the United States may exceed 10% this year, which will face the danger of collapse, which has a great impact on global inflation, including early strength agent,superplasticizer for concrete.


1 Definition

Early strength admixture refers to the admixture that can improve the early strength of concrete and has no significant effect on the later strength.


Superplasticizer for concrete is a concrete admixture that can reduce the amount of mixing water while maintaining the slump of concrete basically unchanged.


2 Categories

Early-strength agents can be divided into three categories according to chemical composition: strong electrolyte inorganic salts, water-soluble organic compounds, and composite early-strength agents composed of organic and inorganic compounds.


Polycarboxylic superplasticizers are usually divided into: lignosulfonate superplasticizers, naphthalene superplasticizers, melamine superplasticizers, sulfamate superplasticizers, and fatty acid superplasticizers according to their chemical composition. Superplasticizers, polycarboxylate superplasticizers.


3 Main ingredients

In addition to chloride and sulfate, early strength agents include nitrite, chromate, etc., as well as organic substances such as triethanolamine, calcium formate, urea, etc.


Different types of superplasticizer for concrete have very different components. It is mainly a surfactant. Currently, the third-generation polycarboxylate superplasticizer is widely used.


4 Uses

The early strength agent does not contain chloride ions and has no rust effect on steel bars. It is suitable for all civil and industrial buildings, prestressed reinforced concrete components, mortar, etc. It is most suitable for construction under low temperature conditions in early winter and early spring. .


Water reducing agent is widely used in high-speed rail, high-speed, civil, industrial buildings and prefabricated component factories, etc. It has wide applicability and is suitable for all seasons.


5 Notes

The dosage of early strength agent is 3-6% of cement. In order to keep the quality of the concrete mixed with this agent uniform, the stirring time is prolonged by 1-2 minutes. Concrete mixed with early strength agent cannot use active mineral orthopedics (such as opal). If this agent is damp and agglomerated, it must be crushed or weathered before use, and its performance remains unchanged.


Because there are many types of superplasticizers, the appropriate type of superplasticizer should be selected according to the needs of the project. For winter construction, it is recommended to use the third-generation polycarboxylate superplasticizer.


If you are looking for high-quality concrete early strength agents, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.



Recently, drone giant DJI said it would suspend operations in Russia and Ukraine to ensure its early strength agent,superplasticizer for concrete are expected to continue to be influenced by international geopolitical situations.

Inquiry us

NEXT NEWS

High Purity Copper Oxide CuO powder CAS 1317-38-0, 99.9%

High Purity Colloidal Gold Nano Gold Solution CAS 7440-57-5

CAS 1592-23-0 Calcium Stearate Powder

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

High Purity Aluminum Nitride AlN Powder CAS 24304-00-5, 99.5%

Difference analysis between early strength agent and superplasticizer for concrete

What is the 3D Printing Metal Powder

What Is Graphite Lubricant?

Compound Polycarboxylate Superplasticizer with Defoaming Air-entraining Component

What is Colloidal Gold?

What is the difference between conductive graphite powder and graphite powder for rubber?

What can Silicon Carbide Devices Bring to New Energy Vehicles?

What is Natural Graphite Used For?

What is Natural Graphite?

What is Amorphous Boron Powder?

What is Zinc Stearate Used For?

What is Indium Selenide Used for?

Influence of Concrete Foaming Agent on Foam Concrete (2)

Influence of Cement Foaming Agent on Foam Concrete(1)

What are Aluminum Nitride Characteristics?

Our Latest Stearic Acid Series

Difference analysis between early strength agent and superplasticizer for concrete

Early strength admixture refers to the admixture that can improve the early strength of concrete and has no significant effect on the later strength.Superplasticizer for concreter is a concrete admixture that can reduce the amount of mixing water whi…

What is Amorphous Boron Powder?

From April the French government will reduce fuel taxes slightly to ease the burden on consumers. Warned of possible energy shortages in France by the end of the year and called on the French to conserve electricity and gas from now on, saying that i…

Use Fumed Silica as Anti-sedimentation Agents

Brazil, the world's largest sugar producer, has recently switched to ethanol fumed silica price is predicted to go higher in the future. Fumed silica is a kind of inorganic nanomaterial with a small particle size, large specific surface a…