What is Max phase material?

Max-phase materials are a new type of machinable ceramic materials that have received extensive attention. Due to the metal-like bonding properties of the Max phase, it has the function of conducting electricity and heat. Most MAX phase materials have good electrical and thermal conductivity. This also has to do with electronic structure.

MAX phase (including Ti3SiC2, Ti2AlC, etc.) is a new type of machinable ceramic material that has attracted much attention.

Applications of Max phase materials

Max-phase materials are widely used in high-temperature structural materials, electrode brush materials, chemical anti-corrosion materials and high-temperature heating materials. Due to the unique nano-layered crystal structure, the MAX phase material is self-lubricating, has high toughness and electrical conductivity.

Supplier of Max phase materials

We provide high purity and ultrafine MAX phase powders, such as Ti3AlC2, Ti2AlC, Ti3SiC2, V2AlC, Ti2SnC, Mo3AlC2, Nb2AlC, V4AlC3, Mo2Ga2C, Cr2AlC, Ta2AlC, Ta4AlC3, Ti3AlCN, Ti2AlN, Ti4AlN3, Nb4AlC3, etc. Email us or click the desired product to send an inquiry.

Payment Term:

T/T, Credit Card, Western Union, Paypal etc.

Term for delivery:

By air, courier or by sea according to the needs of the customer.

Conditions of storage:

1.) Maintain a dry area at the temperature of room.

2.) Avoid high and damp temperatures.

3.) Utilize immediately following the opening of the bag inside.

High Purity Colloidal Gold Nano Gold Solution CAS 7440-57-5

About Colloidal Gold Nano Gold Solution:Colloidal gold benefits:Nanogold is made by using high purity gold as raw material, through a special new processing technology to make gold particle size of 15nm or less, greatly improve the inherent character

What Is Graphite Lubricant?

There are many types of lubricants available, from motor oils to special lubricants such as lithium-based lubricants.

What is TC4 (Ti6Al4V) Titanium Alloy Material

TC4(Ti6Al4V) alloy is a medium strength α-β type two-phase titanium alloy containing 6% α-stabilizing element AI and 4% β-stabilizing element V.

What is the history of lithium batteries?

Lithium batteries were first used in pacemakers.

The introduction to the foam concrete wall pouring method

Foam concrete wall casting methods can be divided into three types: removable formwork casting, formwork-free casting and sandwich wall casting. Among these three types of casting methods, the mold-free casting method is widely used.

High Purity Copper Oxide CuO powder CAS 1317-38-0, 99.9%

High Purity Colloidal Gold Nano Gold Solution CAS 7440-57-5

CAS 1592-23-0 Calcium Stearate Powder

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

High Purity Aluminum Nitride AlN Powder CAS 24304-00-5, 99.5%

Difference analysis between early strength agent and superplasticizer for concrete

What is the 3D Printing Metal Powder

What Is Graphite Lubricant?

Compound Polycarboxylate Superplasticizer with Defoaming Air-entraining Component

What is Colloidal Gold?

What is the difference between conductive graphite powder and graphite powder for rubber?

What can Silicon Carbide Devices Bring to New Energy Vehicles?

What is Natural Graphite Used For?

What is Natural Graphite?

What is Amorphous Boron Powder?

What is Zinc Stearate Used For?

What is Indium Selenide Used for?

Influence of Concrete Foaming Agent on Foam Concrete (2)

Influence of Cement Foaming Agent on Foam Concrete(1)

What are Aluminum Nitride Characteristics?