Products

  • 0
  • 0

TR75 7.5 kW CLC Foam Generator for Lightweight Concrete

The latest forecast from consulting firm AlixPartners is that the chip shortage may cost the global auto industry $110 billion; it will reduce global auto production by 3.9 million this year. For the global chip shortage, AlixPartners analyzed that the main reason is that the chip production cycle is too long; at the same time, other uncontrollable risks from the industry chain have also affected the production rhythm. As the chip supply shortage continues to intensify, some automakers' factories have been forced to stop production for several days Even weeks, which companies such as Ford, GM, Stellantis, and others have been hit particularly hard. Even BMW, which was previously less affected, is beginning to show difficulties, with its Oxford plant in the UK shutting down for three days from April 30 and its Regensburg plant in Germany starting to reduce production shifts this week.
Chip supply shortages drive Concrete Foaming Generator.

Foam Concrete Machine is the core equipment of foam concrete production, which has a significant impact on the quality of foam concrete. An excellent foam generator for concrete not only has a high foam output but more importantly, the quality of the foam produced is outstanding. TR75 portable foam generator developed by our company. It can be used in laboratories, small-scale foam concrete cast-in-situ projects, and pilot lines of foam concrete products. The outstanding advantages of TR75 portable foam generator are low foam moisture content, more foaming agent, high foam uniformity, large foam output, and other benefits.

 

Parameters of TR75 CLC Foam Generator

ModelTR75
Maximum foam output(m3/h):7.5
Motor voltage(V) : 380
Work rate(KW):7.5
Foaming speed(L/m):300
Bubble bleeding(kg/m3):70
Dimensions(cm):1200*700*1000
Weight(kg):300


Benefits of TR75 CLC Foam Generator:

(1) The foam produced is uniform, which helps improve the strength and thermal insulation performance of foam concrete. The foam is uniform, the foam is not easy to be broken in the slurry, the amount of foam is small, and a high closed cell ratio can be formed. The foam is evenly distributed in the mud, which can increase the strength of the foamed concrete;

(2) Low foam density. TR75 portable foam generator has low foam density and saves foaming agent. In the case of the same dilution factor of the foaming agent, the thickness of the foam produced by this machine is 20-40 g/L, and different foaming agents have various dilution factors;

(3) Simple operation, low failure rate, precision parts are selected to reduce the use of wearing pieces, the failure rate is lower, the service life is longer, and one-button control is realized.

 

Note:

(1) The foaming liquid suction pipe is about 1.5m long. Be careful not to remove the filter to prevent impurities from blocking the pump;

(2) Foaming volume: The maximum foaming volume is about 100L/min. The foaming agent used will affect the amount of foaming. The value of 100L/min is the value measured after the company's foaming agent is diluted 60 times;

(3) About making foam concrete: You can use a mixing bucket to make pulp, and then directly foam the foam on top of the slurry. After stirring, the slurry can be mixed with foam to form foam concrete. Take care to minimize the foam stirring time and stir at low speed.


Model:TR75
Maximum foam output(m3/h): 7.5
Motor voltage(V) : 380
Work rate(KW): 7.5
Foaming speed(L/m): 300
Bubble bleeding(kg/m3):70
Dimensions(cm): 1200*700*1000
Weight(kg):300
3D printing technology emerged in the mid-1990s and is actually the latest rapid prototyping device utilizing technologies such as light curing and paper lamination. It is basically the same as ordinary printing. The printer is equipped with "printing materials" such as liquid or powder. After connecting to the computer, the "printing materials" are superimposed layer by layer through computer control, and finally the blueprint on the computer is turned into a real thing. This printing technology is called 3D stereo printing technology.
Our company is a strong company that provides excellent 3D printing products, and also provides Concrete Foaming Generator. If you need 3D printing and Concrete Foaming Generator, please feel free to contact us.

Inquiry us

Our Latest Products

High Purity Copper Oxide CuO powder CAS 1317-38-0, 99.9%

Guotai Junan released a research report saying that under the background of carbon neutrality, the scarcity of coal mines is prominent, and the value of assets will continue to increase. The high point of capital expenditure in the coal industry appe…

High Purity Colloidal Gold Nano Gold Solution CAS 7440-57-5

About Colloidal Gold Nano Gold Solution:Colloidal gold benefits:Nanogold is made by using high purity gold as raw material, through a special new processing technology to make gold particle size of 15nm or less, greatly improve the inherent character…

CAS 1592-23-0 Calcium Stearate Powder

A recent poll in Britain found that public support for sanctions against Russia is falling as fuel and prices rise. The proportion of people willing to accept higher fuel prices as a result of western sanctions against Russia fell 14 percentage poin…